Heat storage system based on copper-coates granules of polyethylene

The innovative and nanotechnologies in the chemical and food industries

4th International Scientific Conference «Chemical Technology and Engineering»: Proceedings – June 26–29th, 2023, Lviv, Ukraine – Lviv: Lviv Polytechnic National University, 2023, pp. 139–142

DOI: https://doi.org/10.23939/cte2023.139

Authors

First and Last Name	Academic degree	E-mail	Affiliation
Anastasiia Kucherenko	No	anastasiia.m.kucherenko [at] lpnu.ua	Department of Chemical Technology of Plastics Processing, Lviv Polytechnic National University Lviv, Ukraine
Ľudmila Dulebová	Ph.D.	ludmila.dulebova [at] tuke.sk	Department of Mechanical Engineering Technologies and Materials, Technical University of Kosice Kosice, Slovakia
Marta Kuznetsova	Ph.D.	kuznetsovam83 [at] gmail.com	Department of heat engineering and thermal and nuclear power plants, Lviv Polytechnic National University Lviv, Ukraine
Volodymyr Moravskyi	Ph.D.	volodymyr.s.moravskyi [at] lpnu.ua	Department of Chemical Technology of Plastics Processing, Lviv Polytechnic National University Lviv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 30.03.2023 - 15:02

Abstract

Abstract – The possibility of using copper granules of polyethylene as a basis for creating effective heat-accumulating systems is considered. It is shown that the efficiency of using metallized polyethylene granules to create heat storage systems is higher.

Keywords

polyethylene copper heat accumulator metallization metal-filled polymer composite

References

[1] Saeed, A., Zaaba, N., Ismeel, H. (2021). A Review: Metal Filled Thermoplastic Composites. Polymer-Plastics Technology and Materials, 60(10). https://doi.org/10.1080/25740881.2021.1882489.

[2] Shaqsi, A.Z., Sopian, K., Al-Hinai, A. (2020). Review of energy storage services, applications, limitations, and benefits. Energy Reports, 6(7), 288-306. https://doi.org/10.1016/j.egyr.2020.07.028.

[3] Atinafu, D.G., Ok, Y.S., Kua, H.W., Kim, S. (2020). Thermal properties of composite organic phase change materials (PCMs): A critical review on their engineering chemistry. Applied Thermal Engineering, 181, 115960. https://doi.org/10.1016/j.applthermaleng.2020.115960.

[4] Zauner, C., Hengstberger, F., Etzel, M., Lager, D., Hofmann, R., Walter, H. (2016). Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM. Applied Energy, 179, 237-246. https://doi.org/10.1016/j.apenergy.2016.06.138.

[5] Moravskyi V., Kucherenko A., Kuznetsova M., Dulebova L., Spišák E. (2022). Obtainment and characterization of metal-coated polyethylene granules as a basis for the development of heat storage systems. Polymers, 14(1), 218. https://doi.org/10.3390/polym14010218.

First published Full Text (30.03.2023 - 15:02)

Official paper