Foam layered apparatus with foam stabilization

Development, energy and resource saving in the chemical and food technologies
Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 72–73

Authors

First and Last Name Academic degree E-mail Affiliation
Aleksandr Liaposhchenko Sc.D. lyaposchenko [at] ukr.net Professor
Sumy , Ukraine
Oleg Khukhryanskiy No lyaposchenko [at] ukr.net General director
Sumy, Ukraine
V. Moiseev Ph.D. bublikova1 [at] gmail.com National Technical University «Kharkov Polytechnical Institute»
Kharkiv, Ukraine
Evgenia Manoilo Ph.D. bublikova1 [at] gmail.com Docent
Kharkiv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 14.03.2019 - 12:48
Abstract

In work were studied the expanded models of foaming apparatuses with gratings, made of tubes of different diameters. The questions of intensification of foam devices with the use of coarse-grating lattices are considered. The possibility of deep cleaning and practically complete cleaning of gases from ammonia and fluoride compounds with their separate absorption is noted.

References

[1] O. Liaposhchenko, O. Khukhryanskiy, V. Moiseev, M. Ochowiak, E. Manoylo, “Intersification of foam layered apparatus by foam stabilization,” Journal of Engineering Sciences, vol. 5, no 2, pp. F13-F18, 2018.

[2] V. F. Moiseev, E. V. Manoylo, K. Yu. Repko, D. V. Davydov, “Treatment of gas-discharge systems on tubular lattices with foam layer stabilizer,” Bulletin of NTU "KhPI", vol. 53, pp. 114-123, 2017.

Official paper