Foam layered apparatus with foam stabilization

Development, energy and resource saving in the chemical and food technologies

Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 72–73

DOI: https://doi.org/10.23939/cte2019.01.072

Authors

First and Last Name	Academic degree	E-mail	Affiliation
Aleksandr Liaposhchenko	Sc.D.	lyaposchenko [at] ukr.net	Professor Sumy , Ukraine
Oleg Khukhryanskiy	No	lyaposchenko [at] ukr.net	General director Sumy, Ukraine
V. Moiseev	Ph.D.	bublikova1 [at] gmail.com	National Technical University «Kharkov Polytechnical Institute» Kharkiv, Ukraine
Evgenia Manoilo	Ph.D.	bublikova1 [at] gmail.com	Docent Kharkiv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 14.03.2019 - 12:48

Abstract

In work were studied the expanded models of foaming apparatuses with gratings, made of tubes of different diameters. The questions of intensification of foam devices with the use of coarse-grating lattices are considered. The possibility of deep cleaning and practically complete cleaning of gases from ammonia and fluoride compounds with their separate absorption is noted.

Keywords

industrial gas emissions cleaning process hydrodynamics mass transfer foam apparatus foam layer research of purification processes stabilization of foam layer intensive apparatus

References

[1] O. Liaposhchenko, O. Khukhryanskiy, V. Moiseev, M. Ochowiak, E. Manoylo, “Intersification of foam layered apparatus by foam stabilization,” Journal of Engineering Sciences, vol. 5, no 2, pp. F13-F18, 2018.

[2] V. F. Moiseev, E. V. Manoylo, K. Yu. Repko, D. V. Davydov, “Treatment of gas-discharge systems on tubular lattices with foam layer stabilizer,” Bulletin of NTU "KhPI", vol. 53, pp. 114-123, 2017.

First published Full Text (14.03.2019 - 12:48)

Official paper