Granulation and drying of fertilizers based on alternative source of phosphorus

Computer simulation in the chemical technology and engineering
Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 45–46

Authors

First and Last Name Academic degree E-mail Affiliation
Mateusz Przywara Ph.D. m.przywara [at] prz.edu.pl Rzeszow University of Technology
Rzeszów, Poland
Michał Kołodziej No michalgerd [at] gmail.com Rzeszow University of Technology
Rzeszów, Poland
Wojciech Marek Ph.D. wmarek [at] prz.edu.pl Rzeszow University of Technology
Rzeszów, Poland
Maksymilian Olbrycht Ph.D. m.olbrycht [at] prz.edu.pl Rzeszow University of Technology
Rzeszów, Poland
Maciej Balawejder Sc.D. maciejb [at] ur.edu.pl University of Rzeszów
Rzeszów, Poland

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 22.03.2019 - 11:54
Abstract

The effect of process variables on granulation of fertilizers was studied. Computer simulations of the granulation process were performed. A comparison of application of pan granulator and fluidized bed granulator was presented.  The kinetics of granule drying was also determined.

References

[1] C.X. Chen, L. Xue, B.E. Liu, “Granulation of ammonium chloride fertilizer and agglomeration mechanism,” Powder Technology, vol. 319, pp. 148-153, 2017.

[2] D.M. Aris, A. Puteh MH., A. Jusuh MNH. Kadir, “Waste bones ash as an alternative source of P for struvite precipitation,” J. Environ. Manage, vol. 203, pp. 861-866, 2017.

[3] M. Rolewicz, P. Rusek, K. Borowik, “Obtaining of granular fertilizers based on ashes from combustion of waste residues and ground bones using phosphorous solubilization by bacteria Bacillus megaterium,” J. Environ. Manage., vol. 216, pp. 28-132, 2018.

[4] I. Opaliński, M. Chutkowski, M. Stasiak, “Characterizing moist food-powder flowability using a Jenike shear-tester,” J. Food Eng., vol. 108, pp. 51-58, 2012.

Official paper