Application of CFD Modeling Techniques to Design and Optimization of Direct-Flow Cyclones

Computer simulation in the chemical technology and engineering
Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 51–52


First and Last Name Academic degree E-mail Affiliation
Roman Havryliv Ph.D. havrilivroman [at] Department of Chemical Engineering, Lviv Polytechnic National University
Lviv, Ukraine
Iryna Kostiv Ph.D. kostiv.irina [at] Department of Chemical Engineering, Lviv Polytechnic National University
Lviv, Ukraine
Volodymyr Maystruk Ph.D. vmaistruk [at] Department of design and operatin of machines, Lviv Polytechnic National University
Lviv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 14.04.2019 - 19:41

In the present study, the direct-flow cyclone model with a varied set of design geometrical parameters has been analysed. Computational fluid dynamic (CFD) tools based on RANS approach and a Eulerian-Lagrangian approach were used to simulate the gas-solid flow in a cyclone separator. 


[1] R.I. Havryliv, V.V. Maystruk, O.O. Timura, O.M. Kuhar, “Determination of hydraulic resistance of cyclones by means of computer modeling Solidworks flow simulation,” Collection of scientific works, vol. 23, no. 16, pp. 364-369, 2013.

[2] V.V. Maystruk, R.I. Havryliv, А.S. Popil, А.М. Basistyi, “Assessment of energy costs in work of direct-acting cyclone using software package flow simulation,” Eastern-European Journal of Enterprise Technologies, vol. 68, no. 60, pp. 28-31, 2012.

[3] B. Vandersson, R. Andersson, L. Hakansson, M. Mortensen, R. Sudiyo, B. Van Wachem, Computational Fluid Dynamics for Engineers, Cambridge University Press, Cambridge, 2012.

Official paper