Deep Eutectic Solvent Reline − Highly Efficient Electrolyte For Stainless Steel Electropolishing
The innovative and nanotechnologies in the chemical and food industries
Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 153–156
I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license
First published on this website: 09.04.2019 - 10:03
Abstract
New modern technology of surface treatment of stainless steel was shown. Deep eutectic solvent Reline was proposed as a highly efficient electrolyte for electropolishing of AISI 304. Anodic treatment of AISI 304 steel samples in Reline leads to an improvement in appearance and surface properties. Electropolished samples are characterized by low roughness, shiny surface, less wettability and as a consequence of higher resistance to corrosion.
Keywords
References
[1] C. C. Shih, C. M. Shih, Y. Y. Su, L. H. J. Su, M. S. Chang, S. J. Lin, “Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications,” Corrosion Science, vol. 46, no. 2, pp. 427-441, 2004.
[2] B. Chatterjee, “Science and Industry of Electropolishing,” Galvanotechnik, vol. 71, no. 1, pp. 71-93, 2015.
[3] L. Ponto, M. Datta, D. Landolt, “Electropolishing of iron-chromium alloys in phosphoric acid - sulphuric acid electrolytes,” Surface and Coatings Technology, vol. 30, рр 265-276, 1987.
[4] M. Datta, D. Landolt, “Electropolishing of iron-chromium alloys in phosphoric acid - sulphuric acid electrolytes,” Surface and Coatings Technology,. vol. 30, pp. 265-276, 1987.
[5] V. B. Singh, U. Arvindt, “Electrodissolution of AISI 304 stainless steel in concentrated acids leading to electropolishing,” Indian Journal of Chemical Technology, vol. 2, pp. 211-216, 1995.
[6] S.-J. Lee, J.-J. Lai, “The effects of electropolishing (EP) process parameters on corrosionresistance of 316L stainless steel,” Journal of Materials Processing Technology, vol. 140, no. 1-3, pp. 206-210, 2003.
[7] P.J. Núñez, E. García-Plaza, M. Hernando, R. Trujillo, “Characterization of Surface Finish of Electropolished Stainless Steel AISI 316L with Varying Electrolyte Concentrations,”Procedia Engineering, vol. 63, pp. 771-778, 2013.
[8] Q. Zhang, K. De Oliveira Vigier, S. Royer, F.Jérôme, “Deep eutectic solvents: syntheses, properties and applications,” Chem. Soc. Rev., vol. 41, no. 21, pp. 7108-7146, 2012.
[9] E. L. Smith, “Deep eutectic solvents (DESs) and the metal finishing industry: where are they now?,” Transactions of the IMF. The International Journal of Surface Engineering and Coatings, vol. 91, no. 5, pp. 241-248, 2013.
[10] A. Paiva, R. Craveiro, I. Aroso, M. Martins, R. L. Reis, A. R. C. Duarte, “Natural deep eutectic solvents – solvents for the 21st century,” ACS Sustainable Chemistry & Engineering 2, vol. 5, pp. 1063-1071, 2014.
[11] E. L. Smith, A. P. Abbott, K. S. Ryder, “Deep eutectic solvents (DESs) and their applications,” Chemical reviews, vol. 114, no. 21, pp. 11060-11082, 2014.
First published Full Text (09.04.2019 - 10:03)
Official paper