1. Home
  2. LEA 2017
  3. Proceedings
  4. Impact of Processing Modes and Parameters of the Working Part of the Instrument on the Surface Quality of Flat Parts During High-Speed Friction Hardening

Impact of Processing Modes and Parameters of the Working Part of the Instrument on the Surface Quality of Flat Parts During High-Speed Friction Hardening

Petro Dmyterko1 dmyterko.petro [at] gmail.com
Yuriy Novitskyy1 iurii.novitskyi [at] gmail.com
Volodymyr Gurey 1 vgurey [at] gmail.com
  1. Department of Mechanics and Automation of Mechanical Engineering, Lviv Polytechnic National University, Ukraine, Lviv, S. Bandery street 12
Abstract 

Impact of processing modes and parameters of the working part of the tool-workpiece on the quality and surface precision of details during high-speed friction hardening of flat details is developed.

Keywords 
surface precision
surface roughness
oscillation
precessional motion
high-speed friction.
References 

[1] Ya. O. Shakhbazov, “Tekhnolohichni mozhlyvosti znyzhennia amplitudy kolyvan tekhnolohichnoi systemy shlifuvannia,” Optymizatsiia vyrobnychykh protsesiv i tekhnichnyi kontrol u mashynobuduvanni ta pryladobuduvanni, vol. 515, pp. 51–54, 2004.

[2] S. P. Nikitin, “Vliyanie kolebaniy dinamicheskoy sistemyi stanka na tochnost i temperaturu pri shlifovanii,” Vestnik Permskogo natsionalnogo issledovatelskogo politehnicheskogo universiteta, no. 3, pp. 31–47, 2010.

[3] A. G. Suslov, V. F. Bezyyazyichnyiy, Yu. V. Panfilov, Injeneriya poverhnosti detaley, Moscow: Mashinostroenie, 2008.

[4] I. V. Hurei, V. I. Hurei, P. R. Dmyterko, “Modeliuvannia hiroskopichnykh protsesiv pid chas fryktsiinoho zmitsnennia detalei mashyn,” Optymizatsiia vyrobnychykh protsesiv i tekhnichnyi kontrol u mashynobuduvanni ta pryladobuduvanni, no. 760, pp. 14–18, 2013.