1. Home
  2. LEA 2017
  3. Proceedings
  4. Bearing capacity of anchors in thin aerated concrete masonry under tension and shear loading

Bearing capacity of anchors in thin aerated concrete masonry under tension and shear loading

Volodymyr Verba1 volodymyr.b.verba [at] lpnu.ua
Younes Charaf1
Tahri Ouassim1
  1. Department of Building Constructions and Bridges, Lviv Polytechnic National University, Ukraine, Lviv, S. Bandery street 12
Abstract 

This article is devoted to a problem of anchoring strength of anchors (wall plugs) in thin aerated concrete blockwork. Aim, research tasks and programme of experiment are represented.

Keywords 
anchors in masonry
aerated concrete blockwork
frame anchors
tension
shear
research program
References 

[1] Anchor Fastening Technology Manual, HILTI, 2014. [Online]. Available: https://www.hilti.group.

[2] European Techical Assessment, ETA-12/0272, 31/03/2016. [Online]. Available: https://www.wkretmet.com/aprobaty/ETA-12_0272_EN.pdf.

[3] Konstruktsii stin iz blokiv z nizdriuvatoho betonu avtoklavnoho tverdnennia. Zahalni tekhnichni umovy [Autoclaved aerated concrete masonry structures. General technical conditions], DSTU B V.2.6-195:2013, 2014.