The paper presents the study results on renewable energy hybrid system within a micro grid which is tied to bulk power system. The voltage variations character has been analyzed considering mode of wind generator reactive power control. Optimal reactive power control requirements are shown in consideration of voltage variation mitigation.
[1] O. Ekren, and B.Y. Ekren, “Size optimization of a PV/wind hybrid energy conversion system with battery storage using response surface methodology”, Applied Energy, 85, pp.1086–1101, 2008.
[2] R. Belu, and D. Koracin, “Statistical and Spectral Analysis of Wind Characteristics Relevant to Wind Energy Assessment Using Tower Measurements in Complex Terrain”, Journal of Wind Energy, Article ID 739162, pp.1-12, 2013.
[3] J. Paska, P. Biczel, and M. K1os, “Hybrid power systems – An effective way of utilising primary energy sources”, Renewable Energy, 34, pp.2414– 2421, 2009.
[4] Y.K. Juan, P. Gao, and J. Wang, “A hybrid decision support system for sustainable office building renovation and energy performance improvement”, Energy and Buildings, 42, pp.290–297, 2010.
[5] P. Nema, R.K. Nema, and S. Rangnekar, “A current and future state of art development of hybrid energy system using wind and PV-solar”, A review, Renewable and Sustainable Energy Reviews, 13, pp.2096–2103, 2010.
[6] Y. Ozaki, M. Miyatake, and D. Iwaki, “Power control of a stand-alone photovoltaic/ wind/ energy storage hybrid generation system with Maximum Power Point Tracker”, Int. Conf. on Electrical Machines and Systems (ICEMS), pp.607-611, 2010.
[7] I. S. Martín, and P. Sanchis, “Wind-photovoltaic hybrid systems design”, Int. Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), pp.610-615, 2010.
[8] Maity and S. Rao, “Simulation and pricing mechanism analysis of a solar-powered electrical microgrid”, IEEE Systems Journal, Vol. 4(3), pp.275–284, 2010.