Deployment Technique of Radar Corner Reflector for SAR Observations

Remote Sensing & GIS for Environmental Monitoring

Authors

First and Last Name Academic degree E-mail Affiliation
Kornyliy Tretyak Sc.D. kornel1958 [at] gmail.com Lviv Polytechnic National University
Lviv, Ukraine
Denys Kukhtar Ph.D. kukhtar3088 [at] gmail.com Ivano-Frankivsk national technical university of oil and gas
Ivano-Frankivsk, Ukraine
Mykola Prykhodko Sc.D. prihodkon [at] ukr.net Ivano-Frankivsk national technical university of oil and gas
Ivano-Frankivsk, Ukraine
Vladyslav Yatsyk No vladacik3 [at] gmail.com Ivano-Frankivsk national technical university of oil and gas
Ivano-Frankivsk, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 26.08.2023 - 22:16
Abstract 

Remote sensing data processed by the InSAR method is widely used to detect, measure, and monitor changes in the Earth's movement. The InSAR method can be used to develop continuous deformation maps and fill gaps in distributed geodetic networks. This method will help in the potential detection of deformation anomalies in large areas that could have been missed due to the discreteness of the GNSS network. In order to improve the results of using this technology in areas without proper persistent and distributed scatterers, it is necessary to use ground corner reflectors. The algorithm for orientation parameters calculating and the method of deploying a trihedral triangular reflector are described in this paper. The details of the Sentinel-1A satellite passage are determined by using the website Heavens Above. The designed three-sided triangular reflector with an inner leg length of 1 m was deployed for the period from May 2023 to June 2023. The analysis of the radar images acquired by the Sentinel-1A satellite was performed using the Earth Observation Browser website.

References 

Bányai, L., Nagy, L.,  Hooper, A., Bozsó, I., Szűcs E. and Wesztergom, V. (2020). Investigation of Integrated Twin Corner Reflectors Designed for 3-D InSAR Applications. IEEE Geoscience and Remote Sensing Letters, vol. 17, no. 6, pp. 1013-1016. doi: 10.1109/LGRS.2019.2939675.

Boxall, K., Christie, F. D. W., Willis, I. C., Wuite, J., & Nagler, T. (2022). Seasonal land-ice-flow variability in the Antarctic Peninsula. The Cryosphere, 16, 3907–3932. https://doi.org/10.5194/tc-16-3907-2022

Ferretti, A. (2014). Satellite InSAR Data: Reservoir Monitoring from Space (EET 9). Houten, Netherlands: EAGE. Available at: https://bookshop.eage.org/product/satellite-insardata-reservoir-monitori....

Garthwaite, M. C., Nancarrow, S., Hislop, A., Thankappan, M., Dawson, J. H., Lawrie, S. (2015). The Design of Radar Corner Reflectors for the Australian Geophysical Observing System: A single design suitable for InSAR deformation monitoring and SAR calibration at multiple mic.URL: https://www.researchgate.net/publication/274569001

Garthwaite, M. C. (2017). On the Design of Radar Corner Reflectors for Deformation Monitoring in Multi-Frequency InSAR. Remote Sensing 9, no. 7: 648. https://doi.org/10.3390/rs9070648.

Heavens Above (2023, March 01). Satellite database. http://www.heavens-above.com

Kadurin, S., & Andrieieva, K. (2021). Ice sheet velocity tracking by Sentinel-1 satellite images at Graham Coast Kyiv Peninsula. Ukrainian Antarctic Journal, 1, 24-31. https://doi.org/10.33275/1727- 7485.1.2021.663.

Sarychikhina, O., & Glowacka, E. (2015). Application of DInSAR Stacking Method for Monitoring of Surface Deformation Due to Geothermal Fluids Extraction in the Cerro Prieto Geothermal Field , Baja California , Mexico. Proceedings World Geothermal Congress 2015 Melbourne, Australia, 19-25 April 2015.

Tretyak, K. and Kukhtar D. (2023). Application of Sentinel-1 radar interferometric images for the monitoring of vertical displacements of the earth’s surface affected by non-tidal atmospheric loading. Geophysical Journal, № 1, Vol. 45. 87-101.