Latitude autonomous determination on fixed base with varied attitude

There is a newer version of this article available
Newer version Date Published
New version of a paper 1 05.11.2020 - 10:03
Discussion is closed on this version, please comment on the latest version above

Authors

First and Last Name Academic degree E-mail Affiliation
Oleksandr Sapegin No o.sapegin [at] kpi.ua National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Kyiv, Ukraine
Serhii Lakoza Ph.D. s.lakoza [at] kpi.ua National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Kyiv, Ukraine
Vadym Avrutov Ph.D. vyshgorod [at] gmail.com National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Kyiv, Ukraine
Dmytro Buhaiov No myscience [at] engineer.com National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Kyiv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 30.10.2020 - 13:13
Abstract 

The main purpose of navigation systems is position determination for different types of moving objects. To start their operation, the onboard standard navigation algorithms requires initial data such as data about the position (latitude, longitude, and altitude). Currently exists different solutions for position determination, the main of them relates to astronomical methods or refers to using satellite or radio signals. But, astronomical methods highly depend on climate conditions, and satellite or radio signals can be unavailable for usage, or even can be intentionally jammed in military applications. Thus, the development of autonomous methods for position determination without using external aiding data is an actual task.

The article proposes the autonomous method of the initial latitude determination utilizing an inertial measurement unit (IMU) and a navigation computer. IMU should be equipped with inertial sensors (orthogonal placed three accelerometers and three gyroscopes) and a signal processing circuit. Where gyroscopes allow measuring projections of Earth's angular velocity on the IMU axes and accelerometers allow measuring projections of the gravity acceleration on the IMU axes.

The efficiency of the proposed method confirmed through the tests with highly accurate sensors such as a triad of ring laser gyroscopes and pendulum accelerometers. In addition, the effects of varios base attitude on the accuracy of the system were considered. Where was obtained latitude variations in different body inclines.

References 
  1. P. G. Savage, “Blazing Gyros – The Evolution of Strapdown Inertial Navigation Technology For Aircraft,” J. Guid. Control. Dyn., vol. 36, no. 3, pp. 637–655, 2013.
  2. O. J. Woodman, “An introduction to inertial navigation,” Cambridge, 2007. doi: 10.1119/1.3081061.
  3. W. Quan, J. Li, X. Gong, and J. Fang, INS/CNS/GNSS integrated navigation technology. 2015.
  4. F. O. Silva, E. M. Hemerly, and W. C. L. Filho, “Error analysis of analytical coarse alignment formulations for stationary SINS,” IEEE Trans. Aerosp. Electron. Syst., 2016, doi: 10.1109/TAES.2016.7738355.
  5. F. O. Silva, E. M. Hemerly, and W. C. L. Filho, “Influence of latitude in coarse self-alignment of strapdown inertial navigation systems,” 2014, doi: 10.1109/PLANS.2014.6851496.
  6. F. O. Silva, W. C. Leite Filho, and E. M. Hemerly, “Design of a stationary self-alignment algorithm for strapdown inertial navigation systems,” in IFAC-PapersOnLine, Jul. 2015, vol. 28, no. 9, pp. 55–60, doi: 10.1016/j.ifacol.2015.08.059.
  7. Y. F. Jiang, “Error analysis of analytic coarse alignment methods,” IEEE Trans. Aerosp. Electron. Syst., 1998, doi: 10.1109/7.640292.
  8. X. Wang and G. Shen, “A fast and accurate initial alignment method for strapdown inertial navigation system on stationary base,” J. Control Theory Appl., vol. 3, no. 2, pp. 145–149, May 2005, doi: 10.1007/s11768-005-0007-4.
  9. H. Yang, B. Zhou, L. Wang, Q. Wei, and R. Zhang, “A novel method for fast stationary initial alignment based on extended measurement information,” IEEE Access, vol. 7, pp. 165873–165883, 2019, doi: 10.1109/ACCESS.2019.2953301.
  10. L. Chang, F. Qin, and S. Jiang, “Strapdown Inertial Navigation System Initial Alignment Based on Modified Process Model,” IEEE Sens. J., vol. 19, no. 15, pp. 6381–6391, Aug. 2019, doi: 10.1109/JSEN.2019.2910213.
  11. G. M. Yan, W. S. Yan, D. M. Xu, and H. Jiang, “SINS initial alignment analysis under geographic latitude uncertainty,” Aerosp. Control, vol. 26, no. 2, pp. 31–34, 2008.
  12. Z. Y. Zheng, A. J. Zhou, J. Tang, and X. Bin Xu, “An Initial Alignment Method of SINS without Latitude Based on Calculation of Earth Axis Vector,” Yuhang Xuebao/Journal Astronaut., 2019, doi: 10.3873/j.issn.1000-1328.2019.01.009.
  13. W. W. Lyu and X. H. Cheng, “Novel self-alignment algorithm with unknown latitude for SINS on swing base,” Zhongguo Guanxing Jishu Xuebao/Journal Chinese Inert. Technol., 2017, doi: 10.13695/j.cnki.12-1222/o3.2017.03.001.
  14. Y. Wang, J. Yang, and B. Yang, “SINS initial alignment of swaying base under geographic latitude uncertainty,” Hangkong Xuebao/Acta Aeronaut. Astronaut. Sin., 2012.
  15. V. V. Avrutov, “Autonomous Determination of Initial Latitude with an Inertial Measuring Unit,” Int. Appl. Mech., 2018, doi: 10.1007/s10778-018-0913-z.
  16. V. V. Avrutov, S. V. Golovach, and V. V. Tsisarzh, “Strapdown Gyro Latitude Finder,” in 2018 IEEE 38th International Conference on Electronics and Nanotechnology, ELNANO 2018 - Proceedings, Sep. 2018, pp. 511–514, doi: 10.1109/ELNANO.2018.8477485.
  17. V. V. Avrutov, S.M. Davydenko, and V. S. Tsisarzh, “Strapdown lnertial north and latitude finder,” Dec. 2018, doi: 10.1109/InertialSensors.2018.8577145.
  18. S. Wang, G. Yang, W. Chen, and L. Wang, “Latitude determination and error analysis for stationary SINS in unknow-position condition,” Sensors (Switzerland), 2020, doi: 10.3390/s20092558.

Comments

Secretary GeoTerrace
researcher, secretary

Dear authors,

Thank you for your paper submission!

Please format the references in your paper according to the conference requirements (APA style). Proper references formatting is essential for conference papers inclusion in the bibliographic databases.

We are looking forward to reviewing your updated paper!

Sincerely,

GeoTerrace Secretary

 

Wed, 11/04/2020 - 13:36
sapegin_a
sapegin_a's picture
researcher

Done

Thu, 11/05/2020 - 10:03