Analysis of the impact of deformations of the foundation on rotor alignment

Engineering Surveying & Deformation Monitoring

Authors

First and Last Name Academic degree E-mail Affiliation
Igor Trevoho Sc.D. itrevoho [at] gmail.com Lviv Politechnic National University
Lviv, Ukraine
Evgen Ilkiv Sc.D. evgen_ilkiv [at] ukr.net Ivano-Frankivsk National Technical University of Oil and Gas
Ivano-Frankivsk, Ukraine
Mykola Prykhodko Sc.D. prihodkon [at] ukr.net Ivano-Frankivsk National Technical University of Oil and Gas
Ivano-Frankivsk, Ukraine
Myron Halyarnyk No geo.myron_zem [at] ukr.net Ivano-Frankivsk National Technical University of Oil and Gas
Ivano-Frankivsk, Ukraine
Dmytro Zhytar No zhytardima2003 [at] gmail.com Ivano-Frankivsk National Technical University of Oil and Gas
Ivano-Frankivsk, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 22.08.2023 - 10:03
Abstract 

The study investigates the impact of vertical displacements of gas pumping unit (GPU) foundations on the alignment of rotors. When the GPU transitions to operational mode, its foundation experiences heating. Thermal deformations of the foundation affect the alignment of the drive and compressor rotors. Non-uniform settlements of GPU foundations can also lead to misalignment of the mentioned rotors. Rotor misalignment results in increased vibration levels and GPU temperatures. This adversely affects their performance and reduces their operational lifespan. Thus, the task arises to account for the influence of these deformations on rotor alignment.

As experience shows, GPU foundations, due to thermal deformations, exhibit complex deformed surfaces that are practically impossible to describe strictly mathematically. Therefore, an approximating surface of the nth order is used to describe such foundations. Based on this, formulas are derived regarding the impact of GPU foundation deformations on the alignment of drive and compressor rotors, accompanied by a rigorous assessment of the accuracy of obtained results. For computational convenience, formulas for determining rotor alignment elements are presented in a matrix form, along with an assessment of their accuracy.

References 

Jalilov, T. F., & Polyshchuk, Yu. V. (1985). Geodesy and Photogrammetry: On the choice of approximating functions in the study of deformations and settlements of structures during their operation in seismic areas. Rostov-on-Don. Pp. 104–109.

 

Novak, V. E., & Klyushin, E. B. (1979). Calculation and evaluation of accuracy of deformation characteristics of foundations of precision structures. Research in Geodesy, Aerial Photography, and Cartography, 5(4), 13–17.

 

Perovich, L. N. (1985). Determination of deformation characteristics of gas pumping units. Geodesy, Cartography, and Aerial Photography, 41, 98–104.

 

Brunken, G. (1981). Analysis of structural movements. General Surveying News, 10, 386–395.

 

Trevoho, I., Ilkiv, E., Halyarnyk, M., & Hrushko, O. (2021). The foundation subsidence of the tower-type structures. International Conference of Young Professionals, GeoTerrace 2021.

 

Trevoho, I., Ilkiv, E., Halyarnyk, M., Kukhtar, D., & Hrushko, O. (2022). Research and improvement of bimetal benchmark construction. International Conference of Young Professionals, GeoTerrace 2022.

 

Dermani, A., & Livierato, E. (1983). Applications of Deformation Analysis in Geodesy and Geodynamics. Reviews of Geophysics and Space Physics, 21(1), 41–50.

 

Hay-Man Ng, A., Ge, L., Chang, H., & Du, Z. (2023). Geodetic Monitoring for Land Deformation. Remote Sensing, 15(1), 283.