Automated system for stability diagnosis of hydro technical structures

Earth Surface Processes & Geodynamics

Authors

First and Last Name Academic degree E-mail Affiliation
Yurii Onanko Ph.D. yaonanko1 [at] gmail.com Institute of Water Problems and Land Reclamation NAAS
Kyiv, Ukraine
Oksana Dmytrenko Sc.D. dmytrenko [at] univ.kiev.ua Taras Shevchenko National University of Kyiv
Kyiv, Ukraine
Anatoliy Onanko Ph.D. onanko [at] i.ua Taras Shevchenko National University of Kyiv
Kyiv, Ukraine
Mukola Kulish Sc.D. kulish [at] univ.kiev.ua Taras Shevchenko National University of Kyiv
Kyiv, Ukraine
Anna Kuzmych No a.a.kuzmych [at] nuwm.edu.us National University of Water and Environmental Engineering
Rivne, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 21.08.2023 - 17:08
Abstract 

The influence of dangerous geological and man-made processes on the real geological environment leads to scattered destruction, which in turn causes the degradation of deformation properties, the reduction of effective elastic properties, and the change in the structure of the fracture-pore space and, accordingly, the change in filtration properties and pore pressure. A characteristic feature of the mechanical behavior of the geological environment is the possibility of accumulating mechanical damage even under small quasi-static loads, not only under the action of shear stresses, but also under tension and compression. The generation of cracks is inevitably accompanied by the absorption of energy owing to the growth of cracks and the corresponding change in the structure of the geological environment in the vicinity of crack banks. Military operations are a source of man-made cracks. Consequently, a significant number of hydro technical structures in Ukraine were damaged and destroyed. This makes it necessary to diagnose the stability of hydro technical structures. For this purpose, an appropriate automated system was developed. The adequacy of its results was verified through experiments using the acoustic emission method.

References 

Bohaienko, V., Romashchenko, M., Sardak, A., & Gladky, A. (2023). Mathematical modelling technique to mitigate soil moisture measurement inaccuracies under the conditions of drip irrigation. Irrigation Science, 41, 413–424. https://doi.org/10.1007/s00271-022-00835-6

Gomelya, N., Trus, I., Stepova, O., Kyryliuk, O., Ivanenko, O., & Homenko, A. (2020). Devising a corrosion inhibitor for steel ST37-2 in a water-oil mixture. Eastern-European Journal of Enterprise Technologies, 2(6 (104)), 28–33. https://doi.org/10.15587/1729-4061.2020.199849

Halysh, V., Trus, I., Nikolaichuk, A., Skiba, M., Radovenchyk, I., Deykun, I., Vorobyova, V., Vasylenko, I., & Sirenko, L. (2020). Spent biosorbents as additives in cement production. Journal of Ecological Engineering, 21 (2), 131–138. https://doi.org/10.12911/22998993/116328

Ivanik, O., Fonseca, J., Shabatura, O., Khomenko, R., Hadiatska, K., & Kravchenko, D. (2022). An integrated approach for landslide hazard assessment: A case study of the Middle Dnieper Basin, Ukraine. Journal of Water and Land Development, 52, 81–86. https://doi.org/10.24425/jwld.2021.139947

Ivanik, O., Menshov, O., Bondar, K., Vyzhva, S., Khomenko, R., Hadiatska, K., Kravchenko, D., & Tustanovska, L. (2022). Integrated approach to modelling and assessing the landslide hazards at the regional and local scale in Kyiv urbanized area, Ukraine. Modeling Earth Systems and Environment, 8, 5479–5491. https://doi.org/10.1007/s40808-022-01447-x

Kuzmych, L., & Voropai, H. (2023). Environmentally safe and resource-saving water regulation technologies on drained lands. In Handbook of Research on Improving the Natural and Ecological Conditions of the Polesie Zone (pp. 75–96). IGI Global. https://doi.org/10.4018/978-1-6684-8248-3.ch005

Onanko, A. P., Kulish, M. P., Lyashenko, O. V., Prodayvoda, G. T., Vyzhva, S. A., & Onanko, Y. A. (2012). Inelastic-elastic properties of SiO2, SiO2 + TiO2 + ZrO2. 2012 IEEE International Conference on Oxide Materials for Electronic Engineering (OMEE), 81–82. https://doi.org/10.1109/OMEE.2012.6464790

Onanko, A. P., Kuryliuk, V. V., Onanko, Y. A., Kuryliuk, A. M., Charnyi, D. V., Dmytrenko, O. P., Kulish, M. P., & Pinchuk-Rugal, T. M. (2021). Features of inelastic and elastic characteristics of Si and SiO2/Si structures. Journal of Nano- and Electronic Physics, 13(5), 05017-1–05017-5. https://doi.org/10.21272/jnep.13(5).05017

Romashchenko, M., Bohaienko, V., Matiash, T., Sardak, A., & Nykytiuk, O. (2022). Usage of mathematical modelling for minimizing ecological risks in irrigation. Proceedings 16th International Conference Monitoring of Geological Processes and Ecological Condition of the Environment, 2022, 1–5. https://doi.org/10.3997/2214-4609.2022580136

Rokochinskiy, A., Kuzmych, L., & Volk, P. (Eds.). (2023). Handbook of Research on Improving the Natural and Ecological Conditions of the Polesie Zone. IGI Global. https://doi.org/10.4018/978-1-6684-8248-3

Turcheniuk, V., Rokochinskiy, A., Kuzmych, L., Volk, P., Koptyuk, R., Romanyuk, I., & Voropay, G. (2022). The efficiency of waste hot water utilization to improve the temperature conditions for growing plants. Journal of Water and Land Development, (54), 94–100. https://doi.org/10.24425/jwld.2022.141559

Vyzhva, S. A., Prodayvoda, G. T., & Onanko, Y. A. (2011). Automated system of anisotropy parameters measurements data analysis of rocks elastic waves ultrasonic velocities. Geoinformatics 2011 - 10th International Conference on Geoinformatics: Theoretical and Applied Aspects, 2011, P090.