Control Systems of Permanent Magnet Synchronous Machine as Port-Controlled Hamiltonian System

Yurii Biletskyi1 biletskyi.y.o [at] gmail.com
  1. Department of Electric drive and computerize electromechanical systems, Lviv Polytechnic National University, Ukraine, Lviv, S. Bandery street 12
Abstract 

One of the most perspective methods of control system design for permanent magnet synchronous motor as a part of electromechanical systems are energy-basedapproaches. The regulation in such systems is realized by forming energy function of the system. The energy-shaping control systems with present regulation elements provide worse response compare with classical systems and are hard to be configured. The main aims of this article are quick view of current energy-shaping control systems, overcoming disadvantages of them and popularization of energy-based approaches in general

Keywords 
permanent magnet synchronous machine
energy-based approach
vector control
energy-shaping control system
structural and parametric synthesis
References 

[1] R. Ortega, A. J. van der Schaft, I. Mareels and B. Maschke, “Putting Energy Back in Control“, IEEE Contr. Syst. Mag., vol.21, no.2, pp.18-33, 2001.

[2] R. Ortega, A. J. van der Schaft, F. Castanos and A. Astolfi, “Control by Interconnection and Standard Passivity-Based Control of Port-Hamiltonian Systems”, IEEE Trans. Aut. Control., vol.53, no.11, pp.2527-2542, 2008.

[3] R. Ortega, A. J. van der Schaft, G. Escobar and B. Maschke, “Interconnection and damping assignment passivity-based control of port-controlled Hamiltonian systems”, Automatica, vol.38, pp.585- 596, 2002.

[4] Z. Zou., Н. Yu and Y. Tang, “Maximum output power of PMSM based on energy-shaping and PWM control principle”, IEEE Intr. Conf. on Aut. and Log., pp.1556-1560, 2008.

[5] F. Ramírez-Leyva, E. Peralta-Sánchez, J. J. Vásquez-Sanjuan and Trujillo-Romero, “Passivity-Based Speed Control for Permanent Magnet Motors”, Procedia Technology., vol.7, pp.215-222, 2013.

[6] V. Petrovic, R. Ortega and A. M. Stankovic, “Interconnection and Damping Assignment Approach to Control of PM Synchronous Motors”, IEEE Conntr. Syst. Tech., vol.9, no.6, pp.811-820, 2001.

[7] M. Khanchoul, M. Hilairet and D. Normand-Cyrot, “A passivity-based controller under low sampling for speed control of PMSM”, Control Engineering Practice, vol.26, pp.20-27, 2014.

[8] H. Yu, S. Yu, J. Liu and J. Yu, “L2 Gain Disturbance Attenuation of PMSM Based on Hamiltonian Systems Control Theory”, in Proceedings of the 8th World Congress on Intelligent Control and Automation, pp.2502-2506, July. 2010.

[9] I. Shchur and Y. Biletskyi, “Optimization of energyshaping control of port-controlled Hamiltonian system”, Computational problems of electrical engineering, vol.3, no.2, pp.101-106, 2013.