Wettability of Stainless Steel Processed Titanium and Molybdenum Ions

Irina Zakharenko1 zakharenko.irina.00 [at] yandex.ru
Vitalii Honcharov2 milostiprosim [at] i.ua
  1. Luhansk Regional Small Academy of Sciences, Ukraine, Rubizhne, Mendeleieva street 1.
  2. Institute of Chemical Technologies (Rubizhne) of the V.Dal' East - Ukrainian National University, Ukraine, Rubizhne, Volodymyrska street 31.
Abstract 

Purpose of work is study of wettability of samples processed by ionic implantation. In the paper wettability was determined by optical method. Wetting angles was determined by using the camera for three types of fluids: water distilled, ordinary tap water and mineral sparkling water. Due to the research it was found that the contact angle of droplets of distilled water for implants less than for steel. This is consistent with theoretical predictions, because roughness increases during implantation. In the case of tap water difference between contact angles decrease. Taking mineral sparkling water wettability of implants compared to untreated samples deteriorates.

Keywords 
wettability
ionic implantation
implants
contact angle
titanium ions
molybdenum ions
References 
  1. Zmochuvannya. Kapіlyarnі yavyscha [Wetting. Capillary phenomena] [Online]. Available: http:// studopedia.org/1-81451.html.
  2. Shcho take gіdrofobnі rechovyny? [What is a hydrophobic substances?] [Online]. Available: http://ukr-article.com/index.php? newsid=6693.
  3. P. V. Alexeyev, Naled i nalednye protsessy [Bodies of ice and ice mound processes], Nauka, Novosibirsk, 1978 (in Russian).
  4. B. D. Summ, “Hysteresis smachyvaniya [Hysteresis wetting]” Sorosovskii obrazovatelnyi zhurnal [Soros Educational Journal], no. 7, pp. 98–102, 1999 (in Russian).
  5. Yu. V. Naidich et al., “Vplyv hravytatsyy na smachyvanye i kapyllyarnie yavlenia v contactnih sistemah "zhidkost - tverdoe telo"[Effect of gravity on the wetting and capillary effects in contact systems "liquid - solid"]” Kosmіchna nauka i tehnologіya [Space science and technology], vol. 19, no. 5, pp. 50-55, 2013 (in Russian).
  6. A. N. Tabenkyn et al., Sherohovatost, volnistost, profil. Mezhdunarodnii opyt [Roughness, waviness, profile. International experience], Publishing House of the Polytechnic University, Sankt-Peterburg, 2007 (in Russian).
  7. B. A. Kalin, “Radiatsionno-puchkovii technologii obrabotki konstruktsyonnyh materialov [RadiationBeam Technologies of construction materials processing]” Physica I khimiya obrabotki materialov [The physics and chemistry of materials processing], no. 4, pp. 5-16, 2001 (in Russian).
  8. L. B. Begrambekov, Modifikatsiya poverhnosti tviordyh tel pri ionnom i plazmennom vozdeistvii: Ucheb. posob. [Modification of the surface of solids at ion and plasma exposure: tutorial], MIFI, Moscow, 2001 (in Russian).
  9. Three-dimensional modeling system [Online]. Available://kompas.ru/kompas-3d-lt/about/.
  10. Gwyddion – Free SPM (AFM, SNOM/NSOM, STM, MFM, …) data analysis software [Online]. Available: http://gwyddion.net/.