Calabria is crossed by a system of active faults which represents a high seismic risk for the whole territory. With a view to providing a contribution to territorial monitoring and control also for the purpose of "forecasting catastrophic events" and territorial prevention, the Geomatics Lab of the Mediterranean University of Reggio Calabria is working on updating the database of faults capable of the Calabria Region through the creation of territorial topographic networks for the monitoring and control of potentially active faults, to be managed through a GIS. In this regard (thanks to the large amount of displacement data acquired over time by the GPS networks implemented), we are also working on the experimentation of a neural network for the prediction of the probability of occurrence of an earthquake of a given magnitude following others occurring in the surrounding area, relating the data provided by the National Institute of Geophysics and Volcanology, with those obtained from the experimental GPS surveying networks, used to monitor active faults (to date the Castrovillari fault, the fault in the area between Fuscaldo - Falerna, and the Reggio Calabria fault).
Aslani, H., Miranda, E. [2005]. Probabilistic Earthquake Loss Estimation and Loss Disaggregation in Buildings. Stanford, CA, USA, Department of Civil and Environmental Engineering, Stanford University, Report No. 157. https://searchworks.stanford.edu/view/kw177ns9250 (accessed 21 February 2019).
Barrile, V., Bilotta, G., D’Amore, E., Meduri, G.M., Trovato, S. [2016]. Structural modeling of a historic castle using close range photogrammetry. International Journal of Mathematics and Computers in Simulation, 10, 370-380.
Barrile, V., Candela, G., Fotia, A., Bernardo, E. [2019a]. UAV Survey of Bridges and Viaduct: Workflow and Application. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11622 LNCS, 269-284.
Barrile, V., Fotia, A., Bernardo, E. [2019b]. The submerged heritage: a virtual journey in our seabed. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42 (2/W10), 17-24.
Barrile, V., Meduri, G. M., Bilotta, G. [2009]. Laser scanner surveying techniques aiming to the study and the spreading of recent architectural structures. Proceedings of the 9th WSEAS International Conference on Signal, Speech and Image Processing, SSIP '09, Proc. 9th WSEAS Int. Conf. Multimedia, Internet and Video Technologies, MIV '09, 92-95.
Barrile, V., Meduri, G. M., Bilotta, G. [2014]. Comparison between two methods for monitoring deformation with Laser Scanner. WSEAS Transactions on Signal Processing, 2014, 10 (1), 497-503.
Parrillo, F., D’Amico, S., Cacciola, M., Morabito, F.C. [2015]. Neural Networks Radial Basis Function and Method Delta/Sigma for the Forecast of Strong Replicas. Atti del 34° Convegno del Gruppo Nazionale di Geofisica della Terra Solida, (Trieste, 17-19 novembre), Esagrafica, Roma, 197-200.
Postorino, M. N., Barrile, V., Cotroneo, F. [2006]. Surface movement ground control by means of a GPS-GIS system. Journal of Air Transport Management, 12 (6), 375-381.
Comments
Dear authors,
Thank you for your paper submission!
Please note that all figures must be clear and understandable (minimum 500 dpi).
We are looking forward to reviewing your updated paper!
Sincerely,
GeoTerrace Secretary
Hi, the only figure that seems hard to understand is figure 3, I replaced it with a higher resolution one. If you think it's not enough, the only solution is to delete it.
Best regards, Ernesto Bernardo
Hi, the only figure that seems hard to understand is figure 3, I replaced it with a higher resolution one. If you think it's not enough, the only solution is to delete it.
Best regards, Ernesto Bernardo
Hi, I just noticed that by transmitting the pdf to the platform, image 3 loses a lot of resolution. I honestly don't know how to do it, I am sending you the original high resolution image attached. As you can see, when I insert it in the word file the resolution is optimal, when I print the pdf the resolution is optimal but when I load the pdf on the platform the resolution becomes very bad,