Operational, constructive and hydrodynamic parameters of foam devices

Development, energy and resource saving in the chemical and food technologies

Proceedings of the 2nd International Scientific Conference «Chemical Technology and Engineering»: June 24–28, 2019, Lviv: Lviv Polytechnic National University, 2018, pp. 79–80

DOI: https://doi.org/10.23939/cte2019.01.079

Authors

First and Last Name	Academic degree	E-mail	Affiliation
V. Moiseev	Ph.D.	bublikova1 [at] gmail.com	National Technical University Kharkiv Polytecnical Institute Kharkiv, Ukraine
Evgenia Manoilo	Ph.D.	bublikova1 [at] gmail.com	National Technical University Kharkiv Polytecnical Institute Kharkiv, Ukraine
Natalia Ponomareva	Ph.D.	bublikova1 [at] gmail.com	National Technical University Kharkiv Polytecnical Institute Kharkiv, Ukraine
Kalif Repko	No	bublikova1 [at] gmail.com	National Technical University Kharkiv Polytecnical Institute Kharkiv, Ukraine
Denys Davydov	No	bublikova1 [at] gmail.com	National Technical University Kharkiv Polytecnical Institute Kharkiv, Ukraine

I and my co-authors (if any) authorize the use of the Paper in accordance with the Creative Commons CC BY license

First published on this website: 21.03.2019 - 12:13

Abstract

Industrial implementation of the stabilization method of the gas-liquid layer can significantly expand the field of foam applications and opens new opportunities for intensifying technological processes with the simultaneous creation of low-waste technologies. The basic parameters influencing the hydrodynamics of foam devices are determined, the basic constructions and operating modes of foam devices are considered. The connection of hydrodynamic parameters is revealed. The hydrodynamics of foam layer is considered.

Keywords

industrial gas emissions cleaning process hydrodynamics mass transfer foam layer purification processes stabilization of foam layer intensive apparatus

References

[1] V. F. Moiseev, E. V. Manoylo, K. Yu. Repko, D. V. Davydov. Treatment of gas-discharge systems on tubular lattices with foam layer stabilizer. Bulletin of NTU "KhPI", № 53, pp. 114-123, 2017, https://doi.org/10.20998/2413-4295.2017.53.17

[2] V. F. Moiseev, E. V. Manoilo, N. G. Ponomaryova, K. Yu. Repko, D. V. Davydov. Methodology of calculation of construction and hydrodynamic parameters of a foam layer apparatus for mass-transfer processes. Bulletin of NTU "KhPI", № 16, pp. 165 – 176, 2018, https://doi.org/10.20998/2413-4295.2018.16.25

First published Full Text (21.03.2019 - 12:13)

Official paper